Custom Saigas & Parts

Shopping Cart

Based on the The Saiga-12 (a Kalashnikov-pattern 12 gauge combat shotgun) our custom variations are 12-ga., smooth bored barrel and chambered to accept shot or slugs including “Magnum” cartridges with 70 and 76 mm cartridge case.

All products come with a one-year Warranty. Shipping costs will be added after purchase confirmation to ensure accurate calculation.

Open Package

Here is how it is configured and what work is performed:

#1. Completely disassemble the shotgun, not one part is left alone.

#2. RandRTargets machines/welds the following;

#3. Install and fit the following R and R Targets custom made Saiga parts;

#4. Install/fit the following parts;

More Details

Modifications:
-Weld/fill in holes in the receiver and mill new slots for the safety,magazine release and stock adapter
-Weld/fill in the original gas ports in the barrel
-Mill in new gas ports for a shortened gas system
-Shorten the gas system and polish/fit
-Mill gas ports for the compensator
-Ream the forcing cone for more uniform shot and less felt recoil
-Cut barrel so there are no threads on the exterior end
-Cut and thread barrel to accept Remington chokes
-Cut bolt and bolt carrier to accept a loaded magazine without holding the bolt back
-Polish and smooth action

Install Custom Parts
-RandRTargets AR 15 Stock Adaptor
-RandRTargets Trigger Guard / Grip Adaptor
-RandRTargets Magazine Well
-RandRTargets Magazine Release (left side of SG for a RH shooter)
-RandRTargets 2" X 11” Vented Handguard
-RandRTargets Double Shotgun Barrel Compensator ( Approved by original designer, JP Rifles )
-RandRTargets Scope Base

Install Additional Parts:
-Veltor collapsible stock
-Ergo Grip
-Burris Fast fire sight
-Briley Improved choke
-Tapco trigger, straighten the trigger and perform a trigger job
-Ceramic coating of barrel and frame
-Fitted Surefire magazine

Tactical Package

Here is how it is configured and what work is performed:
#1. We completely disassemble the shotgun, not one part is left alone.

#2. RandRTargets performs over 6 major customizations;

#3. Install and fit 5 R and R Targets custom made Saiga parts;

#4. Install/fit the following parts;

More Details

Customization:
-Weld/fill in holes in the receiver and mill new slots for the safety,magazine release and stock adapter
-Ream the forcing cone for more uniform shot and less felt recoil
-Cut barrel so there are no threads on the exterior end
-Cut and thread barrel to accept Remington chokes
-Cut bolt and bolt carrier to accept a loaded magazine without holding the bolt back
-Polish and smooth action

Parts:
-RandRTargets AR 15 stock adaptor
-RandRTargets Trigger Guard / Grip Adaptor
-RandRTargets Magazine Well
-RandRTargets Magazine release (left side of SG for a RH shooter)
-RandRTargets 2" X 11” vented handguard

Additional Parts:
-Veltor collapsible stock
-Ergo Grip
-Briley Improved choke
-Tapco trigger, straighten the trigger and perform a trigger job
-Ceramic coating of barrel and frame
-Fitted Surefire magazine